Question: What Is The Correct Level Of Cyanuric Acid In A Pool?

Will cyanuric acid lower over time?

Bottom line While cyanuric acid is an essential product in keeping chlorine active longer, it’s also important to realize that too much of it will weaken it, making it less effective in killing off the bad stuff..

How do you fix high cyanuric acid in a pool?

If the CYA levels that are more than just a little high, diluting your pool water is the only way to lower them. Allow splashout to bring down your water level, then top off your pool with fresh water. If the levels are extremely high, you may need to drain your pool and refill it with fresh water.

Is high cyanuric acid dangerous?

Although cyanuric acid offers a low level of toxicity without any serious health concerns, having high-levels of this chemical in a pool puts people at risk because of the chlorine’s diminished ability to kill bacteria and viruses.

Does shock raise cyanuric acid?

The Cyanuric acid does not have that obstacle to overcome so it stays in your water. When you “shock” continuously what you’re doing is your actually increasing the Cyanuric acid levels stedaly but the chlorine levels go up fight off what they need to then they come right back down.

What should the cyanuric acid level be in my pool?

Saltwater pool manufacturers recommend maintaining cyanuric acid levels around 60-80 ppm. This is a bit higher than the 30-50 ppm range recommended for non-saltwater pools. And if you live in an area where your pool gets a lot of direct sunlight, you may even consider bumping your cyanuric acid up to 80-100 ppm.

Why is my cyanuric acid high in my pool?

It seems like stabilized chlorine use is the main reason for high levels of CYA. As water evaporates, CYA stays behind, just like calcium and salt. If you are using a stabilized chlorine like trichlor or dichlor, CYA accumulates…fast. One pound of trichlor in 10,000 gallons of water will add 6 ppm of CYA.

How do I lower the cyanuric acid in my pool without draining it?

Dilute your pool water if the levels are above 80 ppm. The easiest way to lower the levels of cyanuric acid in your pool is to simply dilute the water. Partially drain your swimming pool by the same percentage by which you want to reduce your cyanuric levels.

Can you swim if cyanuric acid is high?

What happens when CYA in a pool is too high? – CYA Levels exceeding a threshold of 70 parts-per-million of cyanuric acid can reduce the effectiveness of the chlorine in a pool. The amount of time it takes to kill bacteria lengthens as the concentration of CYA increases.

Does pool shock have cyanuric acid?

Dichloroisocyanuric Acid: Also known as “dichlor,” this is another type of chlorine shock. Dichlor contains both chlorine and cyanuric acid and will, over time, raise your cyanuric acid levels. For more information on cyanuric acid, please see our blog post Cyanuric Acid: Friend or Foe.

Does cyanuric acid lower pH?

The fraction that ionizes is pH-dependent. … At ideal pH (7.4 to 7.6) and cyanuric acid levels (30 to 50 ppm), the cyanuric acid/cyanurate system will not significantly contribute to the buffering of pool water. However, as the cyanuric acid levels increase, they will have an effect on the total alkalinity test result.